Complete nZEB Systems Guide 2026 — Energy Efficient Windows for Nearly Zero Energy Buildings
nZEB window guide: BluEvolution 92 profile, Saint-Gobain triple glazing, Warm Edge spacer, Blaugelb precasings and three-layer RAL installation.
An nZEB home loses very little energy, and the windows are usually the weakest point of the building envelope. Three things matter at once: the profile, the glass and the way the window is joined to the wall. Neofort BIZ supplies the whole system in Bucharest and Ilfov — from the Salamander BluEvolution 92 profile to Blaugelb precasings and RAL sealing tapes.
What nZEB means for windows
nZEB (Nearly Zero Energy Building) refers to buildings with nearly zero energy consumption. For windows, Romania's regulation sets maximum Uw values that differ by climate zone; for an nZEB home in Bucharest the target is below 1.0 W/m²K. The catalogue value of the window is not enough, though: if the joint between frame and wall remains a thermal bridge or lets air through, the real performance of the house drops. That is why an nZEB system treats the window and its installation together.
Components of the Neofort BIZ nZEB system
Glass and spacer — where heat escapes through the glazing
Glass covers most of the window surface. For nZEB homes we recommend Saint-Gobain Planitherm triple glazing, with a Ug from 0.5 W/m²K. On sunny facades, Planistar SUN limits solar gain (g-value between 0.27 and 0.60), and next to busy streets Stadip SILENCE provides Rw 44–52 dB sound insulation. The edge of the glass is the second critical area: a conventional aluminium spacer conducts heat (λ = 160 W/mK), whereas the Warm Edge spacer has λ = 0.14 W/mK and keeps the glass edge 4–6°C warmer.
Three-layer RAL installation — the link between window and wall
The joint between frame and wall is sealed on the RAL principle: tighter on the inside than on the outside. On the outside, pre-compressed butyl tape (Sd below 0.1 m) keeps out water and wind but lets vapour escape. In the middle, PU foam provides thermal insulation. On the inside, the vapour barrier tape (Sd above 10 m) stops indoor vapour from entering the joint, where it would condense. For nZEB and passive homes, the window is installed on dense-EPS Blaugelb Triotherm+ precasings, which bring it into the facade insulation layer and sharply reduce the installation thermal bridge.
How to choose windows for an nZEB home
Start from the Uw value the designer requires for the climate zone, then choose the profile: BluEvolution 92, with 6 chambers and a Uw from 0.70 W/m²K, is the PVC profile we recommend for nZEB. Triple glazing, the Warm Edge spacer and installation on precasings make the difference between the catalogue value and the value achieved on site. Neofort BIZ supplies the complete system and provides technical consultancy for nZEB projects in Bucharest and Ilfov.
Frequently Asked Questions — nZEB Systems
Useful Articles About nZEB Systems
Request a Personalised Quote
The Neofort BIZ team will prepare a quote for the complete nZEB system — profile, glass and installation — in Bucharest and Ilfov. On-site measurements are taken after the contract is signed.
Request Quote