Request quoteCall now
Warm Edge Thermo Spacer – Glass Thermal Spacer, λ = 0.14 W/mK, Passive House CertifiedThermal Glazing

nZEB Systems

Warm Edge Thermo Spacer – Glass Thermal Spacer, λ = 0.14 W/mK, Passive House Certified

Thermal spacer with λ = 0.14 W/mK reduces glass edge thermal bridge by 60% vs. classic aluminium (λ = 160 W/mK). Glass edge temperature +4–6°C higher — no condensation near frame.

Technical specifications

MaterialGlass-fibre composite (Swisspacer) / TGI / Thermix
Thermal conductivity λ0.14 W/mK (Swisspacer Ultimate)
vs. aluminiumλ = 160 W/mK — 1000× higher
Available thicknesses6 – 32 mm
ColoursSilver, matt black, bronze, white
StandardEN 1279 — insulating glass
CertificationPassive House Institut Darmstadt
CompatibleDouble and triple glazing
ApplicationIn insulating glass manufacturing

Certified performance

Conductivity λ0.14 W/mK (vs. alu 160 W/mK)
Edge thermal bridge reduction≥ 60% vs. classic spacer
Glass edge temperature+4–6°C vs. aluminium spacer
Condensation onset thresholdShifted 4–6°C lower
Passive House certifiedYes — mandatory for PH
StandardEN 1279 · EN 673

Key advantages

  • Reduces glass edge thermal bridge by ≥ 60% — eliminates visible condensation on glass near frame, the most common aesthetic and hygienic issue
  • Glass edge temperature +4–6°C higher — condensation appears at outdoor temperatures 4–6°C lower, practically disappearing in Romanian climate
  • Mandatory for Passive House certification — without Warm Edge, window cannot be Passive House certified regardless of profile used
  • Available in matt black — perfectly matches black hardware and anthracite profile, the look desired in contemporary architecture
  • Ψ ≈ 0.03 W/mK at the glass edge with Swisspacer Ultimate, versus about 0.08 W/mK with an aluminium spacer (PVC frame, double glazing)
  • Optional on request, priced separately in the quote — about 90% of Neofort BIZ customers choose Warm Edge glazing

The Warm Edge spacer is the internal component of the insulating glass package, responsible for the thermal insulation of the marginal cavity between the glass panes — the most vulnerable zone to thermal bridges in the window assembly. The classic aluminium spacer has thermal conductivity λ = 160 W/mK, approximately 1000 times greater than a Swisspacer Ultimate spacer (λ = 0.14 W/mK). The direct and visible consequence is that the inner edge temperature of the glass increases by 4–6°C compared to glass with a classic spacer, shifting the condensation threshold several degrees below zero and eliminating the visible condensation strip near the frame on winter nights. Warm Edge glass is mandatory for Passive House certification — Passivhaus Institut Darmstadt certifies spacers as separate components — and recommended for any window with BluEvolution 92, Alumil Supreme or any other premium system profile. Neofort BIZ exclusively installs SGG Planitherm insulating glass with Warm Edge spacer of choice — Swisspacer Ultimate, TGI or Thermix TX.N — on request, priced separately in the quote; about 90% of customers choose this solution.

Frequently asked questions

Conductivity. Warm Edge has λ of 0.14 W/mK, aluminium has 160 W/mK — over a thousand times more. The thermal bridge at the glass edge drops by at least 60%.

By 4–6°C against a conventional aluminium spacer. In practice the point at which condensation forms on the glass shifts down by the same 4–6°C.

Because that is where it appears first in winter, and that is where mould and stains on the sill start. Shifting the threshold down means condensation no longer forms at normal winter temperatures.

Certified by the Passive House Institut Darmstadt and manufactured to EN 1279. The spacers come from SWISSPACER.

No. The spacer goes in at the factory when the insulating glass unit is assembled, not into glass that is already made. It is ordered with the glass, in thicknesses from 6 to 32 mm and in silver, matt black, bronze or white.

Request quote for

Warm Edge Thermo Spacer – Glass Thermal Spacer, λ = 0.14 W/mK, Passive House Certified

Consultants available Mon–Fri, 10:00–18:00

Request quoteCall now +40 752 443 435