Installation: evolutionDrive Plus+ and Alumil M 19800
Completed Projects
March 25, 2026·9 min read··Mihai DănălacheMihai Dănălache

Installation: evolutionDrive Plus+ and Alumil M 19800

A real Neofort BIZ project in a villa in Voluntari: a Salamander evolutionDrive Plus+ PVC sliding door for everyday access to the terrace and an Alumil M 19800 SMARTIA thermally broken aluminium folding door that opens the whole wall.

The Salamander evolutionDrive Plus+ sliding door — the PVC sliding system with parallel sealing

What is Salamander evolutionDrive Plus+?

Salamander evolutionDrive Plus+ is the PVC sliding system with parallel sealing from Salamander Window & Door Systems, the German profile manufacturer based in Türkheim (Bavaria). The system brings to a PVC sliding door a seal close to that of a lift-and-slide door (HST), at a lower cost.

Unlike classic sliding systems and tilt-and-slide doors (PSK), on evolutionDrive Plus+ the sash moves parallel to the frame and, when closing, is drawn onto the frame and presses the gaskets along the whole perimeter. The gasket is not rubbed at every opening, so it wears evenly and the door stays airtight over time.


evolutionDrive Plus+ technical specifications

ParameterValue
Construction depth152 mm (with track)
Profile5 chambers
Sealing systemSealing in the frame — parallel
Uw coefficientfrom 0.71 W/m²K with triple glazing
Sound insulationup to 44 dB
Burglar resistanceup to RC 2
Maximum sash weightup to 200 kg
Maximum dimensionsup to 4.0 × 2.6 m
Glazing acceptedup to 49 mm (triple glazing included)

Values depend on the configuration; we confirm them for your door in the quote.


Parallel sealing — why it matters

Classic sliding systems compress the gasket at an angle or by lifting, which causes uneven wear and a gradual loss of airtightness. On evolutionDrive Plus+, the sash moves parallel to the frame and presses the gasket evenly, over the whole contact surface, only when it closes.

Direct benefits for the owner:

  • Better tightness against wind and wind-driven rain than classic sliders, as Salamander shows
  • No draughts when the door is closed, in winter and in summer
  • A gasket that lasts longer — even wear, not localised wear
  • Smooth, quiet sliding, even with heavy sashes
  • Uw from 0.71 W/m²K with triple glazing — suitable for nZEB homes

evolutionDrive Plus+ vs aluminium lift-and-slide — a direct comparison

The most frequent question from clients in Bucharest and Ilfov who are renovating or building a villa: a PVC sliding door or an aluminium lift-and-slide door for the terrace? We compared evolutionDrive Plus+ with the Alumil S 700 SUPREME, on the same 2.4 × 2.2 m opening.

CriterionevolutionDrive Plus+ PVCAlumil S 700 SUPREME
Thermal insulation Uwfrom 0.71 W/m²K (triple)from 1.0 W/m²K
Risk of condensation on the profileVery low — PVC conducts heat poorlyLow — polyamide thermal break
Cost with installation (2.4 × 2.2 m opening)1,900–2,800 EUR2,900–4,000 EUR
Maximum sash weight200 kg500 kg
DimensionsFrame up to 4.0 × 2.6 mLarge panels, for panoramic openings
LookModern, white PVC or decor foilArchitectural, slim metal profile
MaintenanceMinimal — PVC does not oxidiseMinimal — aluminium does not oxidise
nZEB compatibility✅ Uw below 1.0✅ Uw from 1.0

Indicative prices excluding VAT.

Practical conclusion: for openings of up to 4.0 m, daily use and a budget focused on efficiency, evolutionDrive Plus+ is the more sensible choice. For panoramic openings, very heavy panels or a design with slim metal profiles, an aluminium lift-and-slide door is the answer.


evolutionDrive Plus+ with 2 sashes (1 fixed + 1 sliding)

Suitable for openings of 1.6–3.0 m. This is the configuration we install most often in Bucharest apartments and Ilfov villas, as the main access to a terrace or balcony. Budget: 1,900–2,800 EUR with installation for a 2.4 × 2.2 m opening (standard colour, Low-E glazing).

Wider openings, up to 4.0 m

For openings of 3.0–4.0 m, we choose the sash layout according to how you want the door to open. We have installed them in Pipera, Berceni, Voluntari and Otopeni. Budget: 3,000–4,200 EUR with installation for a 3.6 × 2.2 m opening.

Over 4.0 m

This is where evolutionDrive Plus+ reaches its limit. For larger openings we recommend an aluminium lift-and-slide door or, if you want to open the whole wall, a folding system — as in the project below.


Alumil M 19800 SMARTIA — thermally broken folding doors for full openings

What is the Alumil M 19800 system?

SMARTIA M 19800 is the aluminium folding door system (accordion / bi-fold) made by Alumil (Kilkis, Greece), one of the largest aluminium system manufacturers in South-Eastern Europe. It is the most affordable thermally broken folding system in the Alumil range and is designed for terraces, balconies and living rooms where opening the whole wall to the outside matters.

The folding principle: the panels hang from a top track and fold into a compact stack at one end, freeing the whole surface of the opening — no central post and no visual obstacles.


M 19800 SMARTIA technical specifications

ParameterValue
System typeFolding, top-hung on the upper track
Thermal break18 mm, polyamide
Construction depth50 mm
Layouts7 configurations
Water tightnessclass 4A
Maximum panel size1.0 m wide × 2.5 m high
Maximum panel weight80 kg
Glazing accepted24–32 mm
Uf coefficientfrom 1.9 W/m²K
Air permeabilityclass 3
Wind resistanceC1/B1 (ift)
Lockingdouble latches
Gaskets2 EPDM gaskets
ColoursRAL colours and wood-effect finishes

How it works — top-hung, not rolling on the floor

M 19800 uses a top-hung system: each panel hangs from the upper track on rollers that carry up to 80 kg per panel. The floor stays clear — no tracks to step on and no risk of jamming because of dirt.

The panels are linked by hinges and fold one after another into a compact stack. To open the wall, you pull the first panel and the others follow it in a chain.


The thermal break — why it matters on a folding door

Aluminium conducts heat several hundred times better than polyamide (about 160 W/mK, compared with about 0.25 W/mK). A profile without a thermal break carries the cold from outside straight inside, and below 0°C visible condensation forms on the profile. The 18 mm polyamide break in M 19800 interrupts that path.

The practical result: M 19800 has a Uf of 1.9 W/m²K, enough for a terrace used all year round. It is not, however, the system for an nZEB house. There we recommend the Alumil SF 85 SUPREME, with a Uw from 1.0 W/m²K, or a sliding door such as evolutionDrive Plus+.


M 19800 vs other folding systems — what nobody tells you

M 19800 SMARTIA vs SF 85 SUPREME: both are Alumil folding systems. SF 85 is the premium option: 85 mm sashes, a double 40 mm polyamide thermal break with Energy bar, sashes up to 1.5 × 4.0 m and 200 kg, glazing of 20–53 mm, a Uw from 1.0 W/m²K, class RC2 and PAS24 certification. M 19800 costs less and suits terraces with sashes of up to 1.0 × 2.5 m.

M 19800 vs folding doors without a thermal break: for villas in Bucharest and Ilfov used all year round, the version without a thermal break is not recommended — in winter it causes condensation on the profile.

Sash size matters: M 19800 sashes are at most 1.0 × 2.5 m and 80 kg. For taller openings or for corners that open onto two facades, the right system is SF 85 SUPREME.


Why combining evolutionDrive Plus+ and M 19800 is a good choice in 2026

It is a combination Neofort BIZ clients with villas in Bucharest and Ilfov often ask for, for a simple reason: each system does exactly what it does best.

evolutionDrive Plus+ PVCM 19800 SMARTIA aluminium
Role in the projectDaily living-room–terrace accessFull opening for events and summer
Thermal insulationUw from 0.71 W/m²KUf 1.9 W/m²K (profile)
Opening of the gapPartial — about 50%Full — 100%
Relative costMore affordableMore expensive per m²
nZEB compatible✅ YesNo — for nZEB, SF 85 SUPREME
Maximum glazing49 mm (triple)32 mm (double)

A real Neofort BIZ project — residential villa in Voluntari, Ilfov

The client's brief

The owners of a 320 m² villa in Voluntari asked us for comfortable everyday access from the living room to the 40 m² terrace, plus the option of opening the whole 4.8 m wall for parties and warm days. Budget set aside: 9,000–12,000 EUR with installation.

The proposed solution and the reasons behind it

evolutionDrive Plus+ with 2 sashes — 2.4 m × 2.2 m opening, Anthracite RAL 7016, 4/14/4/14/4 Low-E Saint-Gobain Planitherm ONE triple glazing:

  • Uw = 0.82 W/m²K — nZEB eligible
  • Decor foil on both faces — the same colour as the aluminium, for continuity
  • Integrated plissé insect screen — specifically requested by the client

Alumil M 19800 SMARTIA folding door — 4.8 m × 2.4 m opening, Anthracite RAL 7016, 4/16/4 Low-E double glazing with argon:

  • Full opening onto the 40 m² terrace
  • Threshold recessed into the floor — visual continuity between inside and outside
  • Multi-point locking

Carrying out the installation

Total duration: 3 days of installation for both systems.

Stage 1 — evolutionDrive Plus+: fixing the frame with chemical anchors, sealing with pre-compressed tape outside and vapour barrier foil inside (RAL installation), fitting the sashes, parallel adjustment, airtightness check.

Stage 2 — M 19800: setting out and anchoring the top track in the reinforced concrete slab (the critical stage — ±1 mm tolerance), fitting the side frames and the recessed threshold, hanging the panels one by one, adjusting the rollers and hinges, multi-point locking, checking operation and tightness.

At handover: a warranty certificate for product and labour, a report with the parameters checked, and instructions for use and maintenance.


Indicative prices 2026 — Bucharest and Ilfov

SystemConfigurationPrice with installation
evolutionDrive Plus+2 sashes, 2.4 m × 2.2 m, white/anthracite1,900–2,800 EUR
evolutionDrive Plus+3.6 m × 2.2 m opening3,000–4,200 EUR
M 19800 SMARTIA4.8 m × 2.4 m opening3,200–4,600 EUR
M 19800 SMARTIA5.0 m × 2.4 m opening3,400–4,800 EUR
Combined packageevolutionDrive Plus+ 2.4 m + M 19800 4.8 m5,100–7,400 EUR

Prices exclude VAT (21%) and include production, transport and installation in Bucharest and Ilfov. The final price depends on the colour, the glazing, options (plissé screen, special colours) and the specifics of the site.


Frequently Asked Questions — evolutionDrive Plus+ and M 19800

Can I order evolutionDrive Plus+ in special colours?

Yes — from the Salamander decor foil range, including wood effects, anthracite and shades of grey. The two faces can be in different colours.

How wide an opening can the M 19800 folding door cover?

The total width depends on the number of sashes in the project; each sash is at most 1.0 m wide, 2.5 m high and 80 kg, and Alumil offers 7 layouts. For taller openings or larger sashes we recommend the Alumil SF 85 SUPREME, with sashes up to 1.5 × 4.0 m.

How long do production and installation take?

Production: 3–4 weeks from signing the order. Installation: 1 day for evolutionDrive Plus+ and 1–2 days for M 19800.

How much does the evolutionDrive Plus+ and M 19800 package cost?

For a 2.4 m opening for the sliding door and a 4.8 m one for the folding door, the package costs 5,100–7,400 EUR with installation, excluding VAT. You get the exact price in the quote we send within 48 hours.

Does Neofort BIZ offer a warranty?

Yes — a warranty on product and labour, confirmed by a certificate at handover.

Find out more about the Salamander PVC systems and the Alumil aluminium joinery at Neofort BIZ.

Request a quote for your project: oferte@neofort-biz.ro | +40 752 443 435 | Mon–Fri 10–18


Neofort BIZ installs Salamander sliding systems and Alumil folding systems on the same facade, in Bucharest and Ilfov. Send us the openings you have and get a quote within 48 hours. See the PVC joinery range we offer. Useful pages: the Alumil M 19800 SMARTIA folding system and the Alumil SF 85 SUPREME folding system.

Related articles
Resursa recomandata
Complete PVC Guide
Read the complete guide →