Neofort BIZ portfolio: Alumil and Reynaers aluminium joinery, curtain walls and ventilated facades delivered and installed in Bucharest and Ilfov in 2025–2026. Residential blocks, office buildings, commercial spaces and villas — systems, indicative prices and how the process works from project to handover.
The Neofort BIZ portfolio — completed projects in Bucharest 2025–2026
Neofort BIZ supplies and coordinates the installation of aluminium joinery, curtain walls and glass facades in Bucharest and Ilfov. Every project presented below was delivered in full by our team, from surveying and documentation through to installation and handover. For the complete context, read the guide to thermally broken aluminium joinery.
Project 1 — New residential block, Delea Veche, Sector 2
System: Reynaers ConceptSystem 77 | Total area: approx. 800 sqm | Completed: 2025
Delea Veche is one of the most intensely developed residential areas in Sector 2 — a district in rapid transformation, with young buyers and high expectations of the finishes.
What we delivered:
- Reynaers CS 77 tilt-and-turn windows throughout the apartments (double Low-E glazing 4+16+4 argon)
- Balcony doors with the Reynaers ConceptPatio lift-and-slide system
- Building entrance door in Reynaers CS 77 with access control and toughened glass
- Communal doors on the stairwell — Reynaers with thermal break
Colour: RAL 7016 matt anthracite outside, white inside
The technical challenge: a ground-plus-eight block, where the upper floor windows had to be lifted with a platform hoist. Full coordination with the general contractor for delivery in batches, floor by floor.
Project 2 — Office building, Floreasca–Barbu Văcărescu district
System: Alumil CW50 with Alumil Smartia S67 | Facade area: approx. 1,200 sqm | Completed: 2025
The Floreasca–Barbu Văcărescu district is the core of the class A office market in Bucharest. A project with BREEAM Very Good certification requirements.
What we delivered:
- Standard Alumil CW50 curtain wall on the main south and west elevations
- Reflective double Low-E glazing 6+16+6 for solar control (g = 0.27)
- Alumil Smartia S67 tilt-and-turn windows on the north and east elevations
- Main access doors — Alumil with RC2 anti-burglary hardware and integrated access control
- 80 mm Raffstore blinds integrated into the curtain wall cassette (south elevation)
Facade assembly Uw: 1.3 W/m²K — meeting BREEAM Very Good
Project 3 — Ventilated aluminium facade, mixed-use building, Sector 3
System: Alumil with ACM panels (Alucobond) | Area: approx. 600 sqm | Completed: 2024
Ventilated facades combine a load-bearing aluminium structure with an outer layer of ACM panels (aluminium composite), heat-treated timber or stone. The circulating air gap between the insulation and the cladding eliminates condensation and provides natural drainage.
What we delivered:
- Load-bearing structure in extruded Alumil aluminium profiles
- 15 cm basalt wool thermal insulation fixed to the metal structure
- Exterior cladding in 4 mm Alucobond panels with a brushed silver finish
- Infill joinery in Alumil Smartia S67 within the existing openings
- Perimeter flashing and corner cassettes in aluminium
The difference against conventional render: a ventilated facade eliminates thermal bridges, extends the life of the insulation and removes the “breathing building” effect — condensation no longer accumulates within the body of the wall.
The types of project we take on in Bucharest and Ilfov
New residential buildings (blocks, developments)
From 20 to 500+ apartments. Full coordination with the developer and the general contractor. Delivery in batches by floor or by stairwell. Complete CE documentation for the building file.
Commercial and office buildings
CW50/CW60 curtain walls, reflective or Low-E glazing, integrated blinds, automatic access doors. Support for BREEAM and LEED certification.
Ventilated facades
Aluminium structure with insulation and exterior cladding (ACM, HPL, stone, heat-treated timber). Design included, along with thermal calculations and construction details.
Retail and commercial units
Showroom shopfronts, automatic sliding doors, interior glass walls, partitions. Including oversized glass installed with robotic equipment.
Premium villas and individual houses
Lift-and-slide systems, panoramic windows, pergolas with joinery, partial glass-and-aluminium facades.
Indicative project prices in Bucharest — 2026
> ⚠️ Important note: the prices are indicative and reflect conditions as at March 2026. The cost of aluminium and labour can change. Always ask for an up-to-date quotation.
| Type of work | Estimate per sqm |
|---|---|
| Alumil Smartia S67 aluminium joinery | 250–400 EUR/sqm |
| Reynaers CS 77 aluminium joinery | 400–600 EUR/sqm |
| Alumil CW50 curtain wall | 150–250 EUR/sqm |
| Semi-structural curtain wall | 250–400 EUR/sqm |
| Ventilated aluminium and ACM facade | 180–320 EUR/sqm |
| Structural curtain wall | 400–600 EUR/sqm |
*Prices include materials, installation and CE documentation. They exclude transport over 50 km and any structural preparation works.*
How to get a quotation for your project
Step 1: Send us the drawings or photographs of the facade or building by WhatsApp or email.
Step 2: The Neofort BIZ technical team assesses the project and asks for further information if needed.
Step 3: You receive a detailed quotation with system specifications, prices per element and an estimated total — within 48–72 hours.
WhatsApp Projects: +40 752 443 439 | Mon–Fri 10–18
Frequently asked questions
What kinds of aluminium joinery projects does Neofort BIZ carry out in Bucharest?
Neofort BIZ supplies and coordinates the installation of aluminium joinery, curtain walls and glass facades in Bucharest and Ilfov. Every project is delivered in full by the team, from surveying and documentation through to installation and handover.
Which aluminium systems did Neofort BIZ use on the Delea Veche block?
On the new residential block in Delea Veche, Sector 2 (approx. 800 sqm, completed in 2025), Neofort BIZ installed the Reynaers ConceptSystem 77: tilt-and-turn windows with double Low-E glazing 4+16+4 argon and Reynaers ConceptPatio lift-and-slide balcony doors.
Does Neofort BIZ work on new residential developments in Bucharest?
Yes. The portfolio includes new residential blocks in areas of intense construction activity such as Delea Veche, Sector 2 — districts in rapid transformation, with young buyers and high expectations of aluminium and glass finishes.
What aluminium joinery colours are available on Neofort BIZ projects?
Aluminium joinery can be electrostatically coated in any RAL colour. On residential projects, a frequent combination is RAL 7016 matt anthracite outside with white inside — the preferred finish for contemporary architecture in Bucharest.
Neofort BIZ builds curtain walls and glass facades for office buildings and commercial premises in Bucharest and Ilfov. Send us the facade drawings and you will receive a quote within 48 hours. See the aluminium joinery range we offer.
Complete technical guide for nZEB windows in Romania 2026: mandatory minimum values, recom…
Read →Technical GuideTriple vs Double Glazing: How Much Do You Really Save on Heating? Real Calculations 2026Is triple glazing worth it vs classic double? Concrete calculations for apartments and hou…
Read →Technical GuidePVC or Aluminium for nZEB Homes in 2026? Complete Guide by Energy Efficiency, Cost and DurabilityPVC or aluminium for your nZEB home? Complete technical guide 2026: real Uw, total cost, d…
Read →
