Request quoteCall now
PVC Renovation Frame – Window Replacement Without Interior RepairsRenovation Frame

Installation & Renovation

PVC Renovation Frame – Window Replacement Without Interior Repairs

The old window comes out completely, frame included. The new frame is fixed flush with the inner face of the wall and its flange covers the joint — no plaster or paintwork to redo indoors. Foam and the window reveal are done from outside.

Technical specifications

MaterialClass A PVC
Renovation flange35 mm / 60 mm
Profile depth76 mm
Thermal transfer Uw0.73 W/m²K
Compatible glassup to 48 mm
Sound insulationup to 47 dB
Anti-burglaryup to RC3
ColoursWhite, anthracite grey, bicolour
Old frameRemoved completely
InstallationIn the masonry opening, flush with the inner wall face

Certified performance

Interior repairsNot needed
Exterior workFoam from outside + reveal repair
Thermal transfer Uw0.73 W/m²K (76 mm profile)
Sound insulationup to 47 dB
Anti-burglaryRC3 optional
Suitable forOccupied homes, apartment blocks, renovations

Key advantages

  • No interior repairs — the renovation flange covers the gap between the wall and the new window, so plaster, interior sills and paintwork stay untouched
  • The old frame comes out completely — no thermal bridge or damp pocket between two frames, and the new window is anchored straight into the masonry
  • Sealing is done from outside — foam is injected into the installation joint from the exterior and the reveal is repaired from outside too
  • Glazed area stays that of a standard installation — the window fills the opening freed by the old frame instead of sitting over it
  • 35 or 60 mm flange — chosen according to the width of the joint to cover and the state of the plaster edge after removal
  • Perimeter insulation and reveal repair remain on the outside — we agree them up front in the quote, so you know exactly what the job includes

The PVC renovation frame is a window frame with a wide 35 or 60 mm flange, designed to replace old windows without any interior repairs. The old window — timber, PVC or aluminium — is removed completely, frame included, so nothing of the old joinery is left in the opening. The new window is fixed in the masonry opening, flush with the inner face of the wall, and the renovation flange rests on the wall and masks the gap between the masonry and the new frame, including plaster edges damaged during removal. Polyurethane foam is injected into the installation joint from the outside, and the window reveal is also repaired from outside. The result: nothing is broken, plastered or repainted indoors. On the outside, however, perimeter insulation and reveal repair still have to be done, and we agree them in the quote from the start. The method is widespread in Italy, where flanged profiles of 28–65 mm are often installed “a filo parete interna” (flush with the inner wall) and the UNI 11673-1 standard on installation design recommends removing the old frame. The difference from fitting over the old frame is fundamental: there the old frame stays in the wall, 4–6 cm of daylight is lost on every side, and thermal bridges and condensation can form between the two frames. With the renovation frame the old frame is gone, the window is anchored into the masonry and the glazed area stays that of a standard installation. The 76 mm profile delivers Uw = 0.73 W/m²K, glazing up to 48 mm, sound insulation up to 47 dB and burglar resistance up to RC3. Neofort BIZ installs renovation frames in Bucharest and Ilfov and helps you choose the right flange for your opening.

Frequently asked questions

The old window is removed completely, frame included. The new window is fixed in the masonry opening, flush with the inner face of the wall, and the 35 or 60 mm flange rests on the wall and covers the joint. Foam is injected from outside and the reveal is repaired from outside too.

Indoors, none: nothing is broken, plastered or repainted, because the flange masks the joint. Outside, perimeter insulation and reveal repair remain, and we agree them in the quote from the start.

Uw of 0.73 W/m²K on the 76 mm profile, with glazing up to 48 mm. Sound insulation reaches 47 dB and burglar resistance goes up to RC3.

It is removed completely, whether it is timber, PVC or aluminium. Nothing of the old joinery stays in the opening, so no thermal bridges or condensation form between two frames, and the new window is anchored straight into the masonry.

White, anthracite grey and dual-colour options with a different shade inside and out. The profile is Class A PVC from Salamander.

Request quote for

PVC Renovation Frame – Window Replacement Without Interior Repairs

Consultants available Mon–Fri, 10:00–18:00

Request quoteCall now +40 752 443 435